Dorma ES 200 Installation Installing a Dorma ES 200 door closer involves several steps, and while specific instructions might vary slightly based on the exact model or configuration, here’s a general guide to help you with the installation process: Installing a Dorma ES 200 door closer involves several steps, and while specific instructions might vary slightly based on the exact model or configuration, here’s a general guide to help you with the installation process:
Tools and Materials Needed:
- Dorma ES 200 door closer
- Mounting brackets and screws (usually provided with the closer)
- Drill and drill bits
- Screwdriver
- Level
- Measuring tape
- Pencil
Step-by-Step Installation:
- Preparation:
- Read the manufacturer’s installation manual for the Dorma ES 200 carefully before starting.
- Ensure you have all necessary tools and parts.
- The door should be properly aligned and functioning smoothly before installing the closer.
- Determine Mounting Location:
- For Surface Mount: Typically, the closer is mounted on the top of the door and frame.
- For Concealed Mount: The closer is installed inside the door and frame, which requires more extensive preparation.
- Marking the Holes:
- Use the template provided with the Dorma ES 200 to mark the drill holes on the door and frame.
- Make sure to mark the correct location for the mounting brackets and arm.
- Drilling:
- Drill the holes in the door and frame as marked. Use appropriate drill bits to ensure the holes are the correct size for the screws.
- Install the Mounting Brackets:
- Attach the mounting brackets to the door and frame using the screws provided. Ensure the brackets are level and securely fastened.
- Attach the Door Closer:
- Mount the door closer onto the brackets. If it’s a surface-mounted closer, this usually involves sliding it onto the bracket and securing it with screws.
- For concealed models, ensure that the closer is properly aligned within the door and frame cavity before securing it.
- Install the Arm:
- Attach the arm of the closer to the door closer body and the door or frame. Ensure that it is properly aligned and secured.
- Adjust the Settings:
- The Dorma ES 200 usually has several adjustment settings to control the closing speed and latching speed. Follow the manufacturer’s instructions to adjust these settings according to your needs.
- Test the Door:
- Open and close the door several times to ensure that the closer is functioning correctly. Check that the door closes smoothly and latches properly.
- Final Checks:
- Verify that all screws are tight and that the door closer is securely mounted.
- Ensure that the door’s performance meets your expectations and make any necessary adjustments.
Tips:
- It’s helpful to have a second person assist with holding the door or closer while you work.
- Make sure to follow any specific instructions from the manufacturer’s manual, as different models or configurations may have particular requirements.
If you encounter any issues or uncertainties, consulting a professional installer or reaching out to Dorma’s customer support for guidance can be beneficial.
